Swansea • WalesBS EN 14449

Laminated Safety & Security Glass in Swansea

Commercial specification parameters, local district requirements, and regional supplier discovery for laminated safety & security glass across Swansea (Abertawe).

Local Commercial Requirements in Swansea

In Swansea, projects specifying laminated safety & security glass frequently encounter specific architectural conditions across commercial zones like SA1 Waterfront, Swansea City Centre, Maritime Quarter. Direct Atlantic maritime wind exposure, high wind suction on coastal elevations, requiring marine-grade stainless hardware.

Local Building Authority Compliance:Subject to City and County of Swansea Council (Building Regulations Wales) building control and UK Building Regulations Approved Documents (England & Wales).

Verified Technical Specifications (BS EN 14449, BS EN 12600 (Class 1B1 / 2B2), BS EN 356 (P1A to P8B security), BS EN 16613 (Effective Thickness))

Safety Class:Class 1B1 or 2B2 (BS EN 12600); Class P1A to P5A (BS EN 356 manual attack)

Acoustic Reduction:Rw 33 dB to Rw 42 dB (acoustic PVB achieves +3 to +5 dB reduction over monolithic glass of equivalent mass)

Typical U-Value:5.4 to 5.6 W/m²K monolithic; 1.0 to 1.3 W/m²K in sealed insulating units

Cold Cutting:Prohibited

An assembly of two or more panes of glass permanently bonded under heat and pressure (typically 12–14 bar at 135–145°C in an autoclave) using one or more polyvinyl butyral (PVB), ethylene-vinyl acetate (EVA), or structural ionoplast interlayers (BS EN 14449).

Procurement in Swansea

Source Laminated Safety & Security Glass from Verified Suppliers

Find commercial glazing merchants and accredited installers covering SA1, SA2.

Search Swansea Suppliers